Chainsaw Chains 

Off the Saw: $11.00

On the Saw: $15.00

​

Lawnmower Blades

Off the Mower: $10.00

On the Mower: $11.00

​

Reels

$75.00*

*The pricing of reel sharpening can vary depending on the width of the reel

Chainsaw Service/Tune-up:

The Chainsaw Service/Tune-up is usually 25-45 minutes of labor, plus whatever parts need to be replaced. Pricing can increase or decrease depending on the condition of the unit.

​

Service/Tune-up Includes:

• Check Engine Compression (This helps us know how much life your saw has left)

• Check Fuel (If unit has ethanol or bad fuel in tank we will drain and add fresh, stabilized, non-ethanol fuel)

• Check/Change Pump Oil

• Check/Replaced Spark Plug

• Check/Clean/Replace Air Filter

• Check/Clean Spark Arrestor

• Check/Adjusting Controls

• Check/Sharpen or Replace Chain

PUSH/SELF-PROPELLED MOWERS SERVICE/TUNE-UP:

The Push/Self-Propelled Mowers Service/Tune-up is usually 45 minutes of labor, plus whatever parts need to be replaced. Pricing can increase or decrease depending on the condition of the unit.

​

Service/Tune-up Includes:

• Check Engine Compression (This helps us know how much life your saw has left)

• Check Engine RPM

• Check Fuel (If the unit has ethanol or bad fuel in tank we will drain and add fresh, stabilized, non-ethanol fuel)

• Check Fuel Lines/Clamps

• Check/Change Oil

• Check/Replaced Spark Plug

• Check/Clean/Replace Air Filter

• Check, Sharpening and Balancing Blade

• Check Wheels, Adjusters, Belts, Pulleys, and Controls

• Check/Replace Fuel Filter

​

RIDING LAWN MOWERS SERVICE/TUNE-UP:

 

Riding Lawn Mower Service/Tune-up is usually 60-90 minutes (1-1.5hrs) of labor, plus whatever parts need to be replaced. Pricing can increase or decrease depending on the condition of the unit.

​

Service/Tune-up Includes:

• Check and adjust rpm

• Checking blades (sharpening and balancing as needed)

• Checking belts

• Checking spindles

• Checking controls and cables

• Check anti-scalp wheels and tires

• Check deck level

• Lubing as need

• Change oil

• Checking and replacing the air filter, oil filter, fuel filter, spark plug as needed​

​

ZERO-TURNS SERVICE/TUNE-UP:

Zero Turn Service/Tune-up is usually 60-90 minutes (1-1.5hrs) of labor, plus whatever parts need to be replaced. Pricing can increase or decrease depending on the condition of the unit.

​

Service/Tune-up Includes:

• Check, Sharpen and Balance Blades

• Check Spindles

• Check Hour Meter

• Check Transmission Fluids

• Check and Change Engine Oil

• Check and Replace Air Filter

• Check and Replace Spark Plugs

• Check and Replace Fuel Filter

• Check Belts

• Check Tires and Tire Pressure

• Check Controls and Mechanicals

• Check and Adjust Steering

• Check and Level Deck

Handheld Equipment Service/Tune-up

The Handheld Equipment Service/Tune-up is usually 30-45 minutes of labor, plus whatever parts need to be replaced. Pricing can increase or decrease depending on the condition of the unit.

​

Service/Tune-up Includes:

• Before anything else, we check the compression of your machine and make sure that it is operating correctly

• Checking fuel in the tank ( If the unit has ethanol or bad fuel in tank we will drain and add fresh, stabilized non-ethanol fuel)

• Check/Replace/Clean the air filter

• Check/Replace spark plug

• Check/Replace Fuel Filter

• Check/ Clean Spark Arrestor

• Check/Adjusting Controls

​

For String Trimmers we do all the above plus:

• Check/Lube Gearbox

• Check Trimmer head and Guard

SERVICE/TUNEUP SNOWBLOWER:

Snowblower Service/Tune-up is usually 45 minutes of labor, plus whatever parts need to be replaced. Pricing can increase or decrease depending on the condition of the unit.

​

Service/Tune-up Includes:

• We check the compression and proper operation of your unit before we do the tune-up to guarantee you have a running snowblower

• We check and drain any stale or suspicious fuel before we test run your snowblower to protect your engine

• Checking and/or changing engine oil

• Checking and/or replacing the spark plug

• Check/Replace Friction Dick, Belts and Pulleys

• Checking and adjusting controls

• Checking, adjusting skid shoes

• Checking scraper bar

• Checking auger, impeller, shear pins and housing

• Replenishing shear pins/bolts as needed

• Checking tire and tire pressure

• Checking gear-case lube

• Lube unit

We repair all brands, makes, and models.

​

We also offer repairs on generators, tillers, pressure washers, etc.

​

Feel free to call us if you have questions about what we repair. 

​

We also offer Delivery & Pickup!

Bend: $100.00

Sunriver: $75.00

La Pine, Redmond & Sisters: $200.00

Tumalo: $150.00

Prineville & Terrebone: $200.00

​

New Equipment Delivery: $50.00

*Cost includes pick up and delivery. If only one is required, customer is only charged half. Example: If you just want your equipment picked up and you live in Bend it would cost $50.00 instead of $100.00.